Description
This module has 5 pins:
- VCC: Module power supply – 5V
- GND: Ground
- CLK: Clock pin
- DAT: Data pin
- RST: Reset (Must be HIGH for active mode / Active High)
DS1302 RTC Real Time Clock Module
$0.31
| 0+ | $0.31 |
|---|
5000 in stock
SHARE:
Additional information
| Weight | 0.063 kg |
|---|---|
| Dimensions | 4.4 × 2.3 cm |
| Feature 1 | The clock operation is configurable between 24 or 12-hour operation with AM/PM indication |
| Feature 2 | The module uses three leads: RST (Reset), DAT (I/O Data), and CLK (Serial Clock). A separate Ground (GND) and Power (VCC) are also used |
| Feature 3 | The power consumption of the module is very low, providing years of use from a single CR2032 battery |
| Feature 4 | Overall board measures 44mm x 23mm (1.8 inch x 0.9 inch) and requires a CR2032 battery (not included) |
| Feature 5 | The module is compatible with both Arduino and Raspberry Pi supporting both 3.3V and 5V operation |
You must be logged in to post a review.
Related products
-
$2.89
GY-2561 TSL2561 Luminosity Sensor Breakout infrared Light Sensor module integrating sensor
Add to Cart -
$0.88
2 way electromagnetic relay module low level trigger without optocoupler with light3.3v/5v/12v/24v
Add to Cart -
$1.66
PT100 Platinum Resister Temp Probe Temperature Sensor 3 wires 0.5 Meter K type
Add to Cart -
$2.25
XH-M214 12V Soil Moisture Sensor Module Automatic Digital Display Humidity Sensor Controller Switch Output
Add to Cart
Reviews
There are no reviews yet.